Overview: BetaFPV Nano TX V2 ExpressLRS Module – Finest Performing Finances ELRS Module?

Over two years in the past, BetaFPV launched their Nano TX ExpressLRS module to the world, they usually’ve simply launched the second technology, boasting vital enhancements over the unique. Does the BetaFPV Nano TX V2 ELRS module stand as much as the hype, and the way it compares to different nano-sized ExpressLRS modules? Let’s discover out on this evaluation.

A number of the hyperlinks on this web page are affiliate hyperlinks. I obtain a fee (at no further value to you) in the event you make a purchase order after clicking on considered one of these affiliate hyperlinks. This helps assist the free content material for the neighborhood on this web site. Please learn our Affiliate Hyperlink Coverage for extra info.

Be taught extra about radio transmitters in FPV: https://oscarliang.com/radio-transmitter/

Be taught extra about ExpressLRS right here: https://oscarliang.com/setup-expresslrs-2-4ghz/

The place to Purchase?

You should buy the BetaFPV Nano TX V2 module from:

The BetaFPV Nano TX V2 is available in three frequency choices: 2.4GHz, 868MHz, and 915MHz. My evaluation focuses on the two.4GHz model, as it’s my frequency of selection for the management hyperlink.

Specs and Options

• Antenna Connector: RP-SMA (2.4GHz), SMA (915/868MHz)
• RF Energy (2.4GHz): As much as 1W
• RF Energy (915/868MHz): As much as 2W
• Packet Fee (2.4GHz): As much as 1000Hz
• Packet Fee (915/868MHz): As much as 200Hz
• Frequency Band: 2.4GHz ISM, 915MHz FCC, 868MHz EU
• Enter Voltage: 7V~13V DC
• Energy Consumption: Varies by frequency and energy
• USB Port: Sort-C
• Fan Voltage: 5V
• Default Firmware: ExpressLRS V3.3.0
• Weight: 28g

The Nano TX V2 options an built-in TCXO (Temperature-compensated crystal oscillator) to attenuate frequency deviation because of temperature variations for secure efficiency, and likewise deal with higher with sign interference with different gadgets such because the VTX.

The V2 module helps ExpressLRS Backpack, which implies you could possibly configure it to do cool stuff like altering your analog goggle’s channel utilizing your radio.

Right here’s a comparative overview between the brand new Nano TX V2 and the earlier model.

Nearer Look

The Nano TX V2 maintains an analogous aesthetic to its predecessor, that includes a white, injection-molded plastic shell and a light-weight construct at simply 28 grams.

A USB Sort-C port beneath the module facilitates firmware updates and exterior energy connectivity.

For prime RF energy calls for that sure older radios can not meet, an exterior energy supply (7-13V) will be linked utilizing the offered USB-C to XT30 cable. My assessments with the Radiomaster Boxer and Pocket confirmed that exterior energy isn’t wanted for working at 1W, although it’s additionally a helpful choice for these experiencing battery voltage sag at excessive outputs.

The two.4GHz module makes use of an RP-SMA antenna connector, whereas the 868/915MHz variations are geared up with SMA connectors.

Two customizable buttons on the module permit for simple entry to features like Bind Mode, RF Energy adjustment, and VTX Settings adjustments and so on.

With the elevated transmission energy, the Nano TX V2 features a built-in cooling fan, robotically activated at 250mW or greater by default. Though efficient in conserving the module cool, the fan is noticeably loud, measured round 48dB from a meter away.

T-LED Antenna

The Nano TX V2 introduces a first-ever characteristic: the “T-LED” antenna—a T antenna with an built-in LED mild. It’s supposed for pilots to visually monitor their sign throughout flight, with the LED flickering to point knowledge transmission and reception. The flickering velocity varies primarily based on the telemetry ratio and packet price. The T-LED antenna gives a 2dBi acquire, and you could possibly put customary (non-LED) antennas on the Nano TX V2 too.

Nevertheless, in my expertise, the practicality of the T-LED antenna is considerably restricted. Underneath daylight situations, I might hardly see the LED mild, and at excessive packet charges, the speedy flickering makes it seem consistently lit, lowering its effectiveness as a sign indicator.

BetaFPV Nano TX V2 compatibility

The Nano TX V2 seamlessly suits into radios with “Lite” exterior module bays, just like the Radiomaster Pocket that I used.

For these with customary JR module bays (e.g., TX16S, Boxer, and Jumper T20S), an adapter is accessible to accommodate the BetaFPV Nano TX V2 module, guaranteeing broad compatibility throughout varied transmitter fashions.

Get the adapter right here:

Energy Consumption

Energy consumption of the module varies with the RF energy stage, rising considerably at 250mW and above, primarily as a result of cooling fan kicking in.

Right here’s a breakdown of the present draw and precise RF output measured with an ImmersionRC Powermeter V2 throughout completely different energy ranges:

Output Energy Testing

Earlier than conducting the output energy testing, I up to date the Nano TX V2 to the newest ExpressLRS firmware model 3.3.2. When in comparison with the Radiomaster Ranger Nano module, the BetaFPV demonstrated superior RF output energy, initially exceeding 1.3W and stabilizing round 1.16W after 20 minutes of testing, showcasing its spectacular efficiency.

ExpressLRS Firmware Replace

Updating the ExpressLRS firmware on the Nano TX V2 is easy.

Merely join the module to your pc through the USB-C port, use the ExpressLRS Configurator, choose the BetaFPV 2.4GHz Nano TX V2 because the gadget, select UART as the tactic, choose the suitable COM port, and provoke the firmware flashing course of.

Gemini Mode Help?

The Nano TX V2 doesn’t assist Gemini Mode.

For these on this characteristic, I like to recommend testing the SuperG module, which I’ve not too long ago reviewed. Whereas extra pricey, the SuperG doesn’t essentially supply higher vary however does present improved redundancy and extra constant hyperlink high quality, particularly in interference-heavy environments. For pilots on a funds or these flying in areas with low RF noise, the Nano TX V2 stays a stable selection.

Conclusion

For those who’re out there for an reasonably priced but high-performing ExpressLRS module, the BetaFPV Nano TX V2 stands out as a wonderful selection. It delivers excellent output energy alongside well-designed options that improve the person expertise. As a Lite module, and with assistance from a JR to Nano module adapter, it’s primarily appropriate with radios of all sizes. My solely criticism can be the noisy cooling fan, though it proves efficient in sustaining the module’s temperature.

You should buy the BetaFPV Nano TX V2 module from: