Are your photo voltaic lights not working as they need to be?
Whereas photo voltaic lighting is a unbelievable choice in your out of doors areas, you’ll doubtless run into a problem or two with this know-how at some stage.
Listed below are 5 widespread the reason why your photo voltaic lights aren’t working:
- Battery wants changing.
- The pull tab for the battery.
- Soiled photo voltaic panel.
- Defective or broken sensor.
- Water ingress/intrusion.
On this article, you’ll study every of those points and easy methods to treatment them so to confidently repair photo voltaic lights.
Climatebiz specialists design, analysis, fact-check & edit all work meticulously.
Affiliate Disclaimer
Climatebiz is reader-supported. We could earn an affiliate fee whenever you purchase by means of hyperlinks on our website.
Photo voltaic lights not working: 5 important causes
1. Batteries want changing
That is the most typical problem related to photo voltaic lights.
The overwhelming majority of photo voltaic lights include rechargeable batteries put in in them. Most of those batteries are of top of the range and can final for fairly a while (typically years), however they nonetheless have a lifespan.
When your batteries attain the top of their lifespan, you’ll discover that they gained’t work as effectively; they could even cease working completely. So, on this case, to repair your photo voltaic lights, you’ll want to exchange the lifeless batteries.
Please be aware: After buying, bear in mind to cost your lights earlier than utilizing them for the primary time. Don’t count on them to operate at full capability proper out of the field.
2. Battery pull tab/strip
This problem solely applies to newly bought lights.
Most photo voltaic lights include a battery strip or pull tab between the battery and the battery terminal. These tabs are used to protect the battery lifetime of your lights throughout delivery.
In case your photo voltaic lights aren’t working after you’ve unboxed and tried to cost them, the battery tab is probably going nonetheless in place.
Associated Studying: Outside Photo voltaic String Lights (That Can Courageous The Climate)
3. Soiled photo voltaic panel
High quality daylight is your photo voltaic mild’s bread and butter. With out it, it gained’t work.
It’s all very properly to have your lights positioned properly to obtain enough daylight, however that gained’t imply a lot in case your photo voltaic panels are grubby.
Mud and particles are the culprits right here. So earlier than you go about changing any batteries or checking for different points, be sure that your panels are away from any filth that will get in the way in which of them receiving much-needed daylight.
With the above in thoughts, make a concerted effort to frequently check out and preserve your photo voltaic panels, cleansing them when crucial.
4. Defective or broken sensor
Any photo voltaic mild price shopping for will include a light-sensitive sensor. These sensors are accountable for turning your lights on at night time and off in the course of the day.
A defective or broken sensor signifies that your lights gained’t differentiate between the totally different instances of the day. It will power you into manually switching them ON/OFF when required, and let’s be sincere; nobody wants that sort of trouble of their life.
5. Water ingress/intrusion
Regardless that most photo voltaic lighting merchandise include Ingress Safety (IP) to guard towards water and weather-related injury, some should endure from water intrusion.
When this occurs, water or residue could construct up contained in the accompanying photo voltaic panels, damaging the inner wiring and circuitry.
“However why would this occur if my lights have an IP score?“
Water injury may end up from the next:
- Poor construct high quality.
- Inadequate safety.
- Common degradation.
Associated Studying: 20 Finest Batteries For Photo voltaic Lights (Purchaser’s Information)
Methods to repair photo voltaic lights once they break?
Now that we’ve recognized among the most typical points associated to photo voltaic lights not working let’s talk about options to every drawback:
Battery alternative
It’s straightforward to overlook that photo voltaic mild’s rechargeable batteries have a lifespan of roughly three years. Over this era, you’ll discover that the effectivity of your batteries will lower.
However how do you take a look at for a lower in your battery’s effectivity?
Verify the discharging time
You need to have the ability to see the typical runtime of your lights through your product specs sheet – both on-line or offline. Alternatively, it’s good apply to check the runtime of your lights throughout their first discharge.
For instance, in case your lights used to function for 12 hours and now solely work for 8, your batteries are dropping their charging capability.
Deep cost method
Typically, your batteries don’t have sufficient cost to energy your lights. On this case, attempting this 72-hour charging method could yield constructive outcomes.
This method helps your batteries attain their full capability by charging them over an prolonged interval.
To make use of this method, do the next:
- Swap your lights off
- Allow them to cost for 72 hours
- Attempt them out
Use totally different batteries
First, take a look at your photo voltaic lights with normal batteries; you should definitely use ones with the identical voltage.
If the sunshine works, it’s clear that your batteries can’t maintain the cost. You may as well take a look at your rechargeable batteries by utilizing them in any battery-powered machine.
After making an attempt these steps, when you uncover that your batteries are compromised, it’s time to exchange them.
Battery pull tab/strip
You’ll discover this pull tab/strip beneath the battery compartment. Merely take away it to get your lights working.
When you’re uncertain about this strip’s location, some directions ought to come together with your lights – these will level you in the suitable path.
Cleansing a grimy photo voltaic panel
Pure water is the easiest way to scrub photo voltaic panels. Failing that, you need to use rainwater or faucet water with low mineral content material.
Why?
Soaps can go away a movie or residue that encourages filth to stay and construct up faster. Worse but, utilizing a harsh chemical agent whereas cleansing photo voltaic panels may cause scaling. Lastly, cleaning soap can work its manner below the body and injury the silicon.
What if the panel’s clearcoat begins breaking down or turns into hazy?
Right here’s a video, courtesy of Plant Abundance, that’ll enable you to restore your photo voltaic lights to good well being:
For a extra complete information on photo voltaic panel cleansing, take a look at our article — How To Clear Photo voltaic Panels (DIY Ideas & Recommendation).
Checking a defective or broken sensor
Photo voltaic lights with a sensor ought to solely come on within the absence of sunshine. So, to check the working situation of your sensor, you’ll must simulate darkness.
This may be finished by putting your hand or a thick fabric over the sensor. If the sunshine doesn’t activate, then your sensor or among the wiring is probably compromised.
You might wish to examine additional and exchange/repair the sensor or any wiring your self; if you’re very assured in doing so, nice! Ideally, although, you’ll wish to attain out to the producer for help.
Luckily, some producers present warranties that cowl you in such an occasion. Attain out to your product’s producer to see if they provide replacements.
Water ingress/intrusion
As beforehand talked about, photo voltaic lights typically include IP rankings that make them water resistant. Nonetheless, this doesn’t imply that they aren’t inclined to water injury.
Heavy rains and unintentionally submerging them can injury them.
Within the occasion of water intrusion, do the next:
- Be certain that your mild is switched off.
- Open your photo voltaic mild/photo voltaic panel and gently dry off all elements – pay particular consideration to the sensor.
- Rigorously re-assemble it.
- Place it in a dry, heat spot to dry off even additional.
- Go forward and manually take a look at the sunshine to see if it nonetheless works.
Associated Studying: 8 Finest LED Storage Lights (You Should Set up At this time)
Methods to make your photo voltaic lights final lengthy?
Listed below are some tricks to enhance the lifespan of your photo voltaic lights:
- Keep them: Clear and preserve your photo voltaic panels frequently.
- Verify in your batteries: Cost the batteries earlier than use and exchange them when the time comes.
- Place them appropriately: Place your lights and photo voltaic panel in an unobstructed space.
- Retailer when crucial: In case your lights are for ornamental functions otherwise you expertise excessive climate situations over an prolonged time period, deliver them inside for storage.
FAQs
Can I take advantage of any form of rechargeable battery for my photo voltaic lights?
It is very important use the right sort of rechargeable batteries in photo voltaic lights, usually NiMH or NiCd batteries.
They need to be of the identical voltage as really helpful by the producer. Utilizing the unsuitable sort or voltage may end up in poor efficiency or injury to the sunshine.
What ought to I do if my photo voltaic lights usually are not vibrant sufficient?
In case your photo voltaic lights usually are not vibrant sufficient, first guarantee they’re receiving enough daylight in the course of the day and that the photo voltaic panels are clear.
If these usually are not points, the lights could also be dim attributable to growing older LEDs or low battery energy, and it’s possible you’ll want to exchange the LEDs or the batteries.
How can I maximize the daylight acquired by my photo voltaic lights?
To maximise daylight, place the photo voltaic lights in a location the place they’ll obtain direct daylight for almost all of the day, away from shadows solid by bushes, buildings, or different obstructions.
Adjusting the angle of the photo voltaic panel, if doable, may assist in capturing extra daylight.
Can photo voltaic lights be repaired if water has considerably broken the inner elements?
Important water injury to the inner elements of photo voltaic lights, particularly to the circuitry and battery, might be difficult to restore.
In such instances, it may be less expensive to exchange the whole unit except the broken elements are simply accessible and replaceable.
Can I go away my photo voltaic lights outdoors all 12 months spherical, together with winter?
Whereas many photo voltaic lights are designed to resist varied climate situations, excessive chilly, snow, and ice can probably injury them.
It’s really helpful to retailer them inside throughout excessive winter situations, particularly if they’re ornamental or not wanted, to extend their lifespan.
Is it doable to improve the photo voltaic panel or LED in my current photo voltaic mild setup for higher efficiency?
Sure, it’s doable to improve the photo voltaic panel or LED for higher efficiency, but it surely requires understanding of electronics and presumably some soldering abilities.
Upgrading to a better wattage photo voltaic panel can enhance charging effectivity, and altering to a brighter LED can improve mild output. Nonetheless, doing so may void the guarantee, so it’s important to contemplate this earlier than making modifications.
Closing ideas
Fixing photo voltaic lights doesn’t must be a trouble. Positive, it’s possible you’ll end up working into some points with them at some stage. However usually, they don’t are inclined to current you with issues you’ll be able to’t overcome.
Give them a little bit TLC right here and there, and also you’ll be high quality. In spite of everything, when you care for your lights, they’ll care for you.